Keysert Installation and Removal 安裝和拆卸
Installation Keysert插銷螺套安裝
1、Drill out old threads with a standard drill。
用標準鉆頭進行鉆孔，注意適當倒角 (82°-100°)。
2、Tap new threads with a standard tap
用標準絲錐進行攻絲。
3、.Screw in the insert until slightly below surface。
將螺套裝進去至稍低于工件表面。
4、Drive keys down with several hammer taps on the proper installation tool。
用適當的工具將插銷鍵敲入插銷螺套里。
Removal Keysert插銷螺套拆卸
1、Drill out material between keys and internal thread with standard drill to specified depth (refer to charts for proper dimensions)。
將螺套鉆掉一部分到一定的深度。
2、Deflect keys inward and break off。
將插銷螺套里的插銷鍵向內折彎并折斷。
3、Remove insert using an E-Z OUT or similar type tool。
用易卸工具或類似工具將插銷螺套取出。
4、Same size replacement insert may be installed in the original hole。
取出過插銷螺套的螺紋孔可繼續安裝同樣尺寸的螺套。
|
